Serving Southern California Since 2007

How to Reboot a Furnace: 3 Easy Steps to Restart Your Furnace

As winter approaches, many people often become worried about their heating systems, especially if they were not properly maintained the previous year. If you are looking for heating system repair services in Hemet, CA contact EASE. Our expert technicians have compiled a list of how to deal with a malfunctioning furnace at home.

When a furnace breaks down, you can try to revive it by following some DIY tips. This way, you don’t have to compromise your comfort for long, and you can save money too. Continue reading for more information. 

Restart your Furnace in Three Steps

  • Look for the Condition of the Filters

The furnace filters work consistently to provide you with fresh air and a comfortable indoor environment. Our professional HVAC technicians advise homeowners to replace the filters at least every 90 days. Pet owners should change the filters every month, but for some reason, if you have missed it, the chances are high that the filters are clogged with dirt.

You can replace the filters by following these steps:

  • Shut down the furnace at the thermostat.
  • Locate the filter section, usually positioned at the top or bottom of the system.
  • Open the access panel and remove the old filter.
  • Insert a new and clean filter in an orderly manner.
  • Close the access panel.

After this, you can try to restart the furnace. If the problem persists, contact us for professional heating system repair service in Hemet, CA.

  • Inspect the Pilot Light

The pilot light is the one thing that lets the furnace ignite the boilers. Suppose this pilot flame is off; your furnace won’t turn. At this point, you can either remove the panel to check the pilot light or look in. If the light is OFF, you must relight it following the owner’s manual.

The pilot is a part of the old heating systems. You should follow the steps exactly as described in the manual for perfection. When you are done with the pilot light, try restarting the furnace.

If this doesn’t solve your problem, call us for heating system repair service in Murrieta, CA, to look into your problem.

  • Turn the Heating System On and Off

This DIY trick is the oldest and easiest to solve your furnace problem. You can follow the below-mentioned steps to reboot your furnace before you call for a professional service:

  • Locate the breaker box and find the breaker in it and turn it off.
  • Keep the breaker in that condition for at least 10 minutes to let the system reboot itself. After that period, flip the switch of the HVAC breaker ON.
  • Ensure the thermostat is set to Heat, and the temperature should be a few degrees above room temperature.

At this point, your heating system should restart itself and provide excellent service.

Conclusion

If the tips mentioned above don’t work, choose a professional heating repair service in Murrieta, CA. Get in touch with an expert HVAC service provider like EASE.

We are an excellent HVAC service company. Our service is top-notch, reliable, and affordable. Call us at 866-788-3273 or mail us to learn more.